48004-066 | Coleman Mach 15 15,000 BTU | Heat Pump | Textured White

  • Buy 3 for $1,147.54 each and save 5%
With the Coleman®-Mach® HP²™ High Performance Heat Pump you get an economical, electric source of heat and a high performance air conditioner in one sleek package. The HP²™ cools exceedingly well with a powerful 15,000 BTU nominal cooling capacity. When a chill is in the air, a special reversing valve enables the cooling system to convert to a heating system. In fact, with the HP²™, you can put two-and-a-half times more heat into your RV than you can with an electric heat strip.

With the Coleman®-Mach® HP²™ High Performance Heat Pump you get an economical, electric source of heat and a high performance air conditioner in one sleek package.

The HP²™ cools exceedingly well with a powerful 15,000 BTU nominal cooling capacity.  When a chill is in the air, a special reversing valve enables the cooling system to convert to a heating system.  In fact, with the HP²™, you can put two-and-a-half times more heat into your RV than you can with an electric heat strip.

 

Now you can get an economical, electric source of heat And a high performance air conditioner in one!


• The HP²™ with a free-delivery ceiling assembly is ideal for use in
folding camping trailers.

• For ducted applications, you can set the thermostat for your HP²™ to either electric or gas heat. In the electric heat setting, the HP²™ will be your primary heat source as long as the vehicle interior temperature does not drop 5 degrees below thermostat setpoint. If interior vehicle temperature does drop 5 degrees below thermostat setpoint, the thermostat will automatically activate gas furnace operation. The gas furnace operation continues until the thermostat setpoint has been satisfied, after which the HP²™ will again automatically become the primary heat source.

• In Heat Pump mode, the compressor will shut down between 40ºF and 45ºF due to lack of heat in the outside air.

• New two piece inter-locking paintable shrouds include condenser coil protection.

• All-copper tubing has gas-flux brazed joints which are more corrosion-resistant than welds. The copper tubing is rifled inside to create turbulence in the coolant, enhancing the system's ability to dissipate heat.

• The fan motor is mounted directly to the bulkhead to fix the relative position of the motor, blower wheel and ensures a free turning action.

 

This unit is a replacement for the following models:  8535-876, 8535A876, 8535B876, 8535C876, 8535-8763, 8535A8763, 8535B8763, 8535C8763, 8535D8763, 8535D876, 48004-876, 8535D776, 48014-876, 48014-966, 8535-896, 7535A891, 7535A8913, 7535A896, 7535A897, 8535B676, 8535B6762, 8535B6763, 8535B6767, 8535B67P, 8535B896, 8535B8962, 8535B8967, 8535C8762, 8535D676, 8535D6763, 8535D7763, 8535B891

More Information
Fit & Function GuaranteeNo
MSRP$1,699.99
Mfg Part #48004-066

Documentation

Installation, Operation & MaintenanceDOWNLOAD

Specifications

HeightStandard (13.8")
Weight (lbs)90
BTUs15,000
Heat Strip BTUs5,600
Electrical Rating115 VAC, 60Hz, 1 Phase
Full-Load Cooling Amps14.8
Full-Load Heating Amps15.4
Standard Running Watts1800
Air Delivery CFM320
ColorTextured White
Heat PumpYes
Power SaverNo
Condensate PumpNo
Soft StartNo
Model Number Changes

8535-876
8535A876
8535B876
8535C876
8535-8763
8535A8763
8535B8763
8535C8763
8535D8763
8535D876
48004-876
48004-866
48004-666
48054-876
48054-866
48054-666
8535D776
48014-876
48014-966
48014-666
48064-876
48064-966
48064-666
8535-896
7535A891
7535A8913
7535A896
7535A897
8535B676
8535B6762
8535B6763
8535B6767
8535B67P
8535B896
8535B8962
8535B8967
8535C8762
8535D676
8535D6763
8535D7763
8535B891

Write Your Own Review
You're reviewing:48004-066 | Coleman Mach 15 15,000 BTU | Heat Pump | Textured White