Coleman Mach 15 HP 15,000 BTU Heat Pump White 48004-866, 48004-966

With the Coleman®-Mach® HP²™ High Performance Heat Pump you get an economical, electric source of heat and a high performance air conditioner in one sleek package.

The HP²™ cools exceedingly well with a powerful 15,000 BTU nominal cooling capacity. When a chill is in the air, a special reversing valve enables the cooling system to convert to a heating system. In fact, with the HP²™, you can put two-and-a-half times more heat into your RV than you can with an electric heat strip.
Sign up for price alert

Availability: In stock

$785.99

Details

Details

With the Coleman®-Mach® HP²™ High Performance Heat Pump you get an economical, electric source of heat and a high performance air conditioner in one sleek package.

The HP²™ cools exceedingly well with a powerful 15,000 BTU nominal cooling capacity.  When a chill is in the air, a special reversing valve enables the cooling system to convert to a heating system.  In fact, with the HP²™, you can put two-and-a-half times more heat into your RV than you can with an electric heat strip.

 

Now you can get an economical, electric source of heat And a high performance air conditioner in one!


• The HP²™ with a free-delivery ceiling assembly is ideal for use in
folding camping trailers.

• For ducted applications, you can set the thermostat for your HP²™ to either electric or gas heat. In the electric heat setting, the HP²™ will be your primary heat source as long as the vehicle interior temperature does not drop 5 degrees below thermostat setpoint. If interior vehicle temperature does drop 5 degrees below thermostat setpoint, the thermostat will automatically activate gas furnace operation. The gas furnace operation continues until the thermostat setpoint has been satisfied, after which the HP²™ will again automatically become the primary heat source.

• In Heat Pump mode, the compressor will shut down between 40ºF and 45ºF due to lack of heat in the outside air.

• New two piece inter-locking paintable shrouds include condenser coil protection.

• All-copper tubing has gas-flux brazed joints which are more corrosion-resistant than welds. The copper tubing is rifled inside to create turbulence in the coolant, enhancing the system's ability to dissipate heat.

• The fan motor is mounted directly to the bulkhead to fix the relative position of the motor, blower wheel and ensures a free turning action.

 

This unit is a replacement for the following models:  8535-876, 8535A876, 8535B876, 8535C876, 8535-8763, 8535A8763, 8535B8763, 8535C8763, 8535D8763, 8535D876, 48004-876, 8535D776, 48014-876, 48014-966, 8535-896, 7535A891, 7535A8913, 7535A896, 7535A897, 8535B676, 8535B6762, 8535B6763, 8535B6767, 8535B67P, 8535B896, 8535B8962, 8535B8967, 8535C8762, 8535D676, 8535D6763, 8535D7763, 8535B891

Additional Info

Additional Info

MSRP No
BTUs 15,000
Heat Strip BTUs 5,600
Electrical Rating 115 VAC, 60Hz, 1 Phase
Full-Load Cooling Amps 15.4
Full-Load Heating Amps 15.4
Standard Running Watts 1800
Running watts w/ heat strip No
Evaporator Air Delivery CFM (HIGH) No
Color White
Condensate Pump No
Heat Pump Yes
Power Saver No

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.